Weed Eater FEATHERLITE PLUS LE User Manual download pdf

8 "

IMPORTANT: Do not force thread the nut onto trimmer shaft,

otherwise damage to threads may occur.

Pouland/Weedeater & Sears/Craftsman

1. Remove original head (see trimmer manual for instructions).

2. Select the 3/8” nut that correctly fits your trimmer.

4. Install the 3/8” triagular collet so it fits into the Kwik Loader head.

5. Install the 3/8” nut. Tighten securely.

3. Install the large washer between the Kwik Loader head

and trimmer shaft.

7mm

8mm

12mm

10mm

8 "

1. Remove knob and spool.

Note: Pliers may be needed to

remove ‘C’-Clip.

IMPORTANT: Do not force thread the

nut onto trimmer shaft,

otherwise damage

to threads may occur.

Speed Spool

6. Hold the outer cup and install the Kwik

Loader head by hand.

2. Remove ‘C’-Clip, plastic slider and spring.

Do Not remove outer cup.

4. Select a triangular collet that fits the

trimmer shaft and nut being used.

3. Select a nut that correctly fits your trimmer.

7. Tighten securely by hand until seated to

base of outer cup.

5. Install the triagular collet so it fits into the

Kwik Loader head.

02/07 KL1185G

Note: Homelite ONLY, install 3/8” washer

between outer cup and spacer.

IMPORTANT: Do not force thread the bolt

into trimmer shaft, otherwise

damage to threads may occur.

1. Remove knob, spool and spring.

Do Not remove outer cup.

2. Install the spacer, solid side to trimmer

3. Select a bolt that correctly fits your trimmer.

6. When tight, you may have a gap between

the outer cup and Kwik Loader head.

5. Hold the outer cup and install the

Kwik Loader head by hand.

Note: McCulloch ONLY, install the hex

adapter into the triagular collet.

2-Line Head - KL450A

Failure to do the following could result in serious personal injury.

Read and follow all instructions and warnings in your trimmer manual and these instructions.

Always wear proper safety apparel during trimmer operation.

Keep bystanders away 15m (50 ft.) during trimmer operation.

Inspect area and remove any foreign objects such as glass, cans, rocks, metals, wires, etc.

Never handle or change head or line while trimmer is on or running.

4. Install the triagular collet so it fits into

the Kwik Loader head.

153 mm

(6 in.)

WARRANTY

United States Only

90 Day - Homeowner Use

30 Day - Commercial Use

Lifetime - On Line Locking System

Warranty from date of sale on parts found

to be defective in material and/or workmanship.

KPI will not be held liable for stripped or damaged threads.

1-888-CUT KWIK

www.kwikproducts.com

Mon-Fri 10am-4pm EST

1 2

Summary of Contents

Page 1

?3/8 "?BIMPORTANT: Do not force thread the nut onto trimmer shaft, otherwise damage to threads may occur.Pouland/Weedeater

Page 2 - FRANÇAIS

INSTALACIÓNESPAÑOLINSTALLATIONFRANÇAISNo hacer lo siguiente podría resultar en lesiones personales graves.Lea y siga todas las instrucciones y adverte

Comments to this Manuals

No comments

Weed Eater FEATHERLITE PLUS LE User Manual

Browse online or download User Manual for Grass trimmers Weed Eater FEATHERLITE PLUS LE. KL450 Frnt - Kwik Products, Inc.

Summary of Contents

Comments to this Manuals

Related products and manuals for Grass trimmers Weed Eater FEATHERLITE PLUS LE