Weed Eater 530163438 Instruction Manual

R TrademarkWARNING:Read and follow all Safety Rules and Operating Instructions beforeusing this product. Failure to do so can result in serious injury

10LIMITED WARRANTYELECTROLUX HOME PRODUCTS, INC.,war rants to the original purchaser that each newWeed Eaterrbrand gasoline tool or attachmentis free

11warr anted part which is not scheduled for re-placement as required maintenance, or which isscheduled only for regular inspection to the ef-fect of

2SAFETY RULESWARNING:When using gardeningappliances, basic safety precautions must al-ways be followed to reduce the risk of fire andserious injury. R

3CUTTING SAFETYWARNING:Inspect the area beforeeach use. Remove objects (rocks, brokenglass, nails, wire, etc.) w hich can be thrownby or become entang

41. Remove wing nut from shield.2. Insert bracket into slot as shown.3. Pivot shield until bolt passes through hole inbracket.4. Securely tighten wing

5IMPORTANTExperience indicates that alcohol blendedfuels (called gasohol or using ethanol ormethanol) can attract moisture which leads toseparation an

6OPERATING INSTRUCTIONSOPERATING POSITIONEye ProtectionLong PantsHeavy ShoesALWAYS WEAR:Cut from your right to your left.WARNING:Always wear eye prote

7about 3 in. (8 cm) above the ground and at anangle. Allow the tip of the line to strike theground around trees, posts, monuments, etc.This technique

8SERVICE AND ADJUSTMENTSLINE REPLACEMENT1. Remove spool by firmly pulling on tapbutton.2. Clean entire surface of hub and spool.3. Replace with a pre-

9SClean air filter.SCheck entire unit for loose screws, nuts,and bolts. Replace any damaged, broken,or worn parts.SAt the beginning of the next season