FS 45, FS 46
English
31
N Straighten out the nylon lines and
wind them tightly on to the spool –
one nylon line in each chamber.
N Engage the ends of the lines in the
notches (2).
Assembling the mowing head
Check that the compression spring is
installed (see "Mounting the Mowing
Head").
N Thread the ends of the lines (6)
through the sleeves (7) and push
the spool (2) into the head so that it
snaps into position.
The nylon lines must disengage from the
notches (5) as the spool is pushed into
position.
N Pull out the ends of the lines as far
as stop.
N Mount the mowing head on the
machine.
Maintenance Work
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Fuel Pickup Body in Tank
N Have the pickup body in the fuel
tank replaced every year.
Spark Arrestor in Muffler
N If the engine is low on power, have
your dealer check the spark arrestor
(country-specific option) in the
muffler.
Inspections and Maintenance
by Dealer
Comments to this Manuals